Baie Chanteloube (maiden trip)

by JoFischer05 I did this with my ONAK canoe

First assembly:

After having received the boat it took me half a day to understand and assemble it the first time. After some mails with Nele at ONAK I received a new manual (still in beta, not yet published at that time) which showed much more explaining pictures than the delivered manual - I would have loved to have seen it before I started. In addition Nele gave me a link to a video, which showed very clear how to fold the nose and that some kind of brute force is required the first time - I'll share it here for you all:
https://www.youtube.com/watch?v=LX4qqXMY9pc
Somewhere I found the information, that the eventual gaps in the aluminium structure must not be tolerated during the assembly. Instead it is possible to push the two bars together with force which lets the inner piece of the bar move as far as needed, thus closing the gap. Before I knew that and when I heared a metallic sound even though that there was still a gap, I didn't expect that by pushing hard I could close this gap. So - this information might help you to do it right :-)

Finally the boat was built and I stored it in the garage in order to allow the folds to be accustomed to this situation :-) Few place was left in the garage  beside the car making very clear, that buying a foldable boat was the right decision.

The maiden trip:

Next day I loaded the ready-built boat on the roof rack of my car (why folding and re-building it, when it's already built?) and we drove down to the lake. 

First launch of the boat in water - it swims! Not really a surprise, but nice to see anyway ;-) Next stage: step in and sit down. The seat slipped down a bit but then was stable and felt rather comfortable. Next time I'll tighten the belts of the seat even more.

It was evident, that we needed to be accustomed to the movements of the boat. The first minutes it seemed to us rather wobbly, but then our muscles of the back understood, that they have the function to keep the balance. 

And here we go - silently paddling over the mirror-like, cristal clear water of the calm lake. The boat needs little effort to advance and I learned fast how to stear with the short paddle. My wife in the front seat was happy to be allowed to adjust the length of the paddle, which is necessary due to the fact that the boat is wider in the middle.

We kept on paddling for two hours without a break, then a short "technical" stop - the coffee was ready to be released ;-) And then we continued for even another hour, something at which we where surprised, because with all the boats we tried before (rented kayaks and our previous boat Gumotex Palava) we where always tired after 1,5 to 2 hours. The next day I stated sore muscles of the back and my elbow reported some pain due to the regular movements of paddling and steering. This will be less a problem after some more trips and thus more training of muscles and elbows. During the 2nd part of our trip we experienced a lake more agitated with waves from remote motorboats and upcoming winds. After our experience in calm water we found that it was important to try this, too, and that the boat did well in this situation.

After our trip the disassembly went rather fast, given it was the first time. Especially cleaning the boat went super fast, compared to the tedious cleaning of the inflatable boat, where we needed to remove water from every hidden corner. After all the folded boat went neatly on the back seat of my car - perfect! Later on I'll have another try to put it in the luggage compartement, which was already full this day.

Conclusion: ONAK is a wonderful and beautiful boat, easy and not tiring to use. We're looking forward to our next trips!